Wastewater Automatic Batch Units (ABU)

Integrated's ABU - The Answer to Simplified Wastewater Treatment

This unit is designed for ease and simplicity of treatment yet with added technologies to assist the operator in mixing and filtration. These units are exceptionally well suited for direct sewer discharge or for 100% reuse water recycling, such as pressure washing and other miscellaneous cleaning.

Tremendous improvement in the quality of the treated wastewater is achieved by using the highest performance FloccinAgents™ (flocculating agents) available. Many highly satisfied customers have proven results in the field using this approach.

Continuous Flow Wastewater Treatment System

Features

  • Integral 304 SS Treatment Tank and Discharge Tank
  • Filtration Table with Variable Speed Electrical Control(s)
  • Mixing Motor and Variable speed Controller
  • Discharge Sump Pump w/ independent float control
  • 304 Stainless Steel Frame
  • Variable Speed Relay Logic

 

Industrial Wastewater Treatment Automatic Batch Unit

Typical Specifications for ABU:

  • Integral 304 SS Treatment Tank and Discharge Tank
  • Filtration Table with Variable Speed Electrical Control(s)
  • 1/2 hp Mixing Motor and Variable speed Controller
  • Discharge Sump Pump w/ independent float control
  • 304 Stainless Steel Frame with Fork Lift Guides
  • Variable Speed Relay Logic
  • 120 VAC, 1F - 30 amp service

 

Model ABU Paperwidth Reaction Tank Length Width Height Amps
100 24” (61 cm) 100 gal 7ft (214 cm) 42” (107 cm) 90” (214 cm) 20
250 42” (107 cm) 250 gal 9 ft (275 cm) 60” (152 cm) 96” (244 cm) 20
400 42” (107 cm) 400 gal 9 ft (275 cm) 60” (152 cm) 96” (244 cm) 20

*Specifications are approximate and subject to change without notification.

Additional Automatic Batch Unit Treatment Options

Vacuum assisted dewatering table

Incorporation of a vacuum pump and table plate to pull the water from the paper & cake on the dewatering table for the driest cake.

Double Belt Press

 

Pre-ozonation skid for increased flocculation

This is a separate skid mounted unit for pre-flocculation ozonation to assist in breaking down oils and start metal precipitation, this can reduce Floccin™ usage by as much as 30%.

Post-ozonation skid for purification

This is a separate skid mounted unit for post-flocculation ozonation to aid in reduction of bacterial and microbial contaminants where water is going to be reused.

Buy Now or Inquire >>>Get Started

Integrated Engineers Inc Logo

Learn How to $$Save$$