Manufacturing Wastewater Treatment Case Studies
Ceramic
Polishing Media Wastewater Treatment
Costs Reduced by 40%
A company was using several chemistries to remove the total suspended solids (TSS) from their wastewater. The facility manufactures stainless steel surgical instruments. The wastewater is generated from the polishing/deburring of these instruments using an aluminum/ceramic polishing media.
The jar tests shown are from
the addition of the Floccin™ H
to the wastewater and
moderate mixing. The TSS
before ranged from 300-700
ppm and treated TSS was
less than 10 ppm, well
below their discharge
permit. Costs for the
Floccin™ H was 40% less
than their previous
chemistries and required
less operator time and labor.
Follow the links at the left for more industrial wastewater treatment manufacturing case studies.
Download more manufacturing industry case studies here>>>
Get Started Right Away>>>
